• Image

Kristin Two-Way Reclining Lift Chair


The New 2-Way Reclining Lift Chair that Features
the new level 4 Charolette fabric as a standard feature, and also is designed with a 325 lbs. weight capacity. This model Features
a more contemporary look with a 2-button waterfall backrest. Battery back-up is not available with vib / heat at this time. The frame of the chair is all kiln-dried hardwood; and all stress points are kiln-dried oak. All joints are glued and connected with steel fasteners. Uni-construction of seat-back is independently lab-tested for strength and durability. Gang nails are used at all other critical joints or stress points. All bolts used are Grade 5 (Med-lift is the only lift chair mfr. using this grade of bolt). All bolts go entirely through the wood; no lag screws are used to secure the mechanism. The mechanism is secured by special locking T-nuts to ensure that the mechanism stays tight throughout the lifetime of the chair. All critical connection points for the reclining hardware, etc., have a double locking nut of the highest aircraft grade quality. All wood screws used are the strongest available. Corner blocks are used throughout the chair at all critical points for added strength. An extra rail is used across the top of the seat back to ensure that the back stays straight and square. All seat springs used are 9 gauges Morley system no-sag springs that are tied together with tie wire to make every spring work together as a seat unit. Seat spring is correctly spaced on the spring rails by a special clip rail machine. The front seat rail on the frame is larger and thicker than most competitors' products, which makes the seat much stronger and durable. There is also a retainer rail secured by steel brads on top of the seat springs to ensure that they do not loosen. The back springs are 12 gauges, and are also tied together with special tie wire for more comfort and endurance. To ensure that the seat springs do not cut into the bottom of the seat foam, the Med-Lift uses a nova bond pad. The fiber used in the backs is a dustless, odorless, non-allergenic, conjugated fiber, which is the best the Med-Lift can find in the industry. This feature makes the backs retain their original shape, while also offering greater comfort. Hi-density seat foam is the only foam the Med-Lift uses. It offers the closest thing to a "perfect seating configuration" that is available in the industry. Hi-density basically pushes back 1 pound for every pound of weight that is exerted on it. This characteristic makes the chairs basically; sit the same for a 90 lb. person as for a 300 lb. person. This foam will keep 99.9% of its original shape and size, whereas, most conventional foam will shrink 10 - 15% in size over the first few years. The Med-Lift also use a special break-in process before the foam is ever cut to make the foam feel good from the first use on. As an added benefit to this foam, The Med-Lift also glue a layer of super soft on top of the Hi-density which gives a very nice feel to the seat, while allowing all the benefits of the Hi-density base for strength and long life. This feature also makes the seat foam pressure-reducing. The foundation of the chair is the lift base. After testing all the lift bases on the market today, the Med-Lift has determined that the Super Sages lift base (made in the USA) is the best available. While more expensive, it will withstand constant use and abuse that a lift chair must endure. A lift base must be as wide as the base of the chair, and the Super Sages base the Med-Lift uses is the most stable base in the upright lifted position that is available in the marketplace today. This chair Features
a low volt quiet motor. Battery back-up is a standard feature. All fabrics used on any Med-Lift chair meets both CAL 117 and UFAC requirements for flammability. The Med-Lift has independent labs test the fabric, foam, and fibers once a year to ensure that they meet correct specifications. The Med-Lift cannot attach the UFAC tag or purchase the tags if components do not pass this testing. The Med-Lift also makes sure that before any upholstery is placed on the frame, that no fabric comes in direct contact with wood. The wood frame that might come in contact with fabric is surrounded by an extra layer of foam or micro-foam to ensure a long fabric life. This extra padding makes the arms, arm fronts; backs, etc. feel softer and more plush. Features
Upholstered in the level 4 Charolette fabric Magazine pocket on lower outer right-hand side of chair Made in the USA Bottom support: Fiber field bag Cord Included: Yes Hardware Included: Yes Independent operating footrest and backrest: No

See something odd? Report it to Casopia. Please describe what's wrong.

Please leave a comment in the field above.
Thanks for helping us be 100% accurate.

Product Features

Overall: 41.5'' H x 31.5'' W x 41'' D
Overall Product Weight: 125lb.

Installation Docs

  • SKU: LIVCH1335

  • Specs

    Weights & Dimensions Other Dimensions
    Overall: 41.5'' H x 31.5'' W x 41'' D
    Seat: 19'' H x 19.5'' D
    Back: 25'' H
    Fully Reclined: 37'' H x 60'' D
    Recommended height range: 5' 4" to 6'
    Overall Product Weight: 125 lb. Features
    Product Type: Zero-gravity positioning
    Back Type: Waterfall pillow
    Hardware Finish: Black
    Primary Material: Other
    Primary Material Details: Fabric
    Footrest Included: Yes
    Arms Included: Yes
    Arm Cover Included: No
    Head Pillow Included: No
    Headrest Cover Included: No
    Lumbar Pillow Included: No
    Magazine Rack Included: No
    Dual Pockets: Yes
    Battery Backup: Yes
    Massage: Yes
    Heated: Yes
    Weight Capacity: 325 Pounds
    Country of Manufacture: United States Assembly
    Assembly Required: No
    Product Warranty: 4 Years
    About the Manufacturer At Med-Lift and Mobility, our goal is to provide our customers with the most reliable lift chairs and adjustable beds available. We are continuously researching methods and materials that will allow us to manufacture products that require less maintenance and provide more years of service. More About This Product When you buy a Med-Lift Two-Way Reclining Lift Chair online from Casopia, we make it as easy as possible for you to find out when your product will be delivered. Read customer reviews and common Questions and Answers for Med-Lift Part #: 1170-CH on this page. If you have any questions about your purchase or any other product for sale, our customer service representatives are available to help. Whether you just want to buy a Med-Lift Two-Way Reclining Lift Chair or shop for your entire home, Casopia has a zillion things home. + More